Abbreviations used in these
operating instructions
MRL
Machinery Directive 2006/42/EC
ERL
EMC Directive 2004/108/EC
NRL
Low Voltage Directive 2006/95/EC
Symbols used
The operating instructions contain important information / issue and danger symbols, which
must be noted and complied with:
Warning!
This symbol warns of potential danger to health, life and limb.
Warning! Potentially lethal voltage
This sign warns of danger to life and limb due to the presence of high-voltage
electrical circuits. Failure to observe the danger can result in severe injury or
death.
Attention!
This symbol means important instructions are being given. Failure to observe the
instructions may result in equipment malfunction or damage to machinery.
Information:
This symbol means important information or advice is being given.
Complying with safety information
Prior to using the iOP-19-TFT CNC control panel or making any alterations to
the electrical installations in or on your machinery, please ensure that you have
carefully read through the safety information in these operating instructions.
