CNC control panel iOP-19-TFT
Page - 5
1
General
Please read these operating instructions through to the end and carefully follow the
instructions given.
Failure to comply with these operating instructions can result in damage
to property, personal injury or death.
1.1 Safety note
The iOP-19-TFT CNC control panel is designed in
accordance with state of the art technology and in full
compliance with recognised safety standards.
This equipment must only be operated in a fault-free
condition. Any observed defect must be removed before
the equipment is used. This equipment must only be
operated by trained personnel. Children should not be
allowed in the vicinity of the equipment.
This equipment must only be used in accordance with its
intended purpose, i.e. for the monitoring and control of
CNC machinery linked to a separate iSR/iPC series
control computer.
Equipment operations must only be carried out by
authorised, qualified personnel and in full compliance
with electrical industry regulations and safety standards.
Ensure the equipment is fully disconnected from the mains
supply before opening the cover and carrying out any
electrical installation work.
Ensure there is sufficient ventilation in the immediate
vicinity of the monitor. Ensure the equipment is mounted
in a safe and stable position and that the ventilation ports
in the monitor housing are left open and unobstructed.
Equipment assembly and operation must be undertaken in
compliance with all relevant conformity declaration
standards. The guidelines and threshold values issued by
the manufacturer do not provide protection in the event of
improper use of the equipment.
The equipment must not be exposed to excessive levels of
humidity or vibration.
Ensure that all operators are familiar with the content of
these operating instructions and that such content is
strictly adhered to at all times!
