iMC-B / iMC-V Operating Instruction
page - 6
2
Controller types
Controller
type
Motor type
power
amplifier
max. axis
iMC-B
Brushed isel - DC-servo-motors (BDC)
iMD10
6
iMC-V
Brushless isel - DC-servo-motors (BLDC)
iMD20
6
All controllers have to be used only with the compatible motor type.
Please read this operation instruction manual carefully before first use of the
controller.
Scope of delivery -
iMC-B
(Part.-No. 354000 10X
1
0)
Servo-controller iMC-B as desk device with the following components:
o
2 - 6 integrated power amplifiers iMD10 for brushed DC-servo-motors
(B-DC) /1/
o
Control PC iSR10 with CAN PCI card iCC10
o
CAN IO 16/16 module
o
Security circuit module iSM5 (not useable on CAN bus)
10,2” LCD with touch screen and mini keyboard in the case front
Main cable (protection contact plug, IEC-60320 power connector)
RS232-communication cable, 9-pin Sub-D (plug) to RJ45 (plug)
Connector package
Control software Remote (option: ProNC)
Operating instruction in printed form
Option:
frequency inverter 750W for working spindle,
max. 4 axis possible
Scope of delivery -
iMC-V
(Part.-No. 354000 20X
1
0)
Servo-controller iMC-V as desk device with the following components:
o
2 - 6 integrated power amplifiers iMD20 for brushless DC-servo-
motors (BL-DC) /2/
o
Control PC iSR10 with CAN PCI card iCC10
o
CAN IO 16/16 module
o
Security circuit module (not useable on CAN bus)
10,2” LCD with touch screen and mini keyboard in the case front
Main cable (protection contact plug, IEC-60320 power connector)
RS232-communication cable, 9-pin Sub-D (plug) to RJ45 (plug)
Connector package
Control software Remote (option: ProNC)
Operating instruction in printed form
Option:
frequency inverter 750W for working spindle,
max. 4 axis possible
1
X-number of power amplifiers, 2 - 6
