iMC-B / iMC-V Operating Instruction
page - 19
3.
Click on the entry “Installation of control software“. The following window will be
shown:
Choose now the setup software depending on your motor type and click on the
entry to start the installation. (in this example
“
Installation of ACSetup
“)
Follow the instructions of the setup assistant.
After finishing the installation click on button “Exit“ to close the Auto-Start-menu.
Start
DCSetup.exe /
ACSetup.exe
via the desktop shortcut or via the start menu
entry:
Start
Programs ACSetup
ACSetup / DCSetup
Information on parameterization of motor power amplifiers iMD10 you
will find in the manual
/1/
DC-Servo positioning module with
CANopen interface UVE8112 / iMD10.
Therefore open the file
“dcsetup_eng.pdf “ via shortcut in the start menu.
Information on parameterization of motor power amplifiers iMD20 you
will find in the manual
/2/
AC-Servo positioning module with
CANopen interface iMD20 / iMD40.
Therefore open the file
“acsetup_eng.pdf “ via shortcut in the start menu.
