iMC-B / iMC-V Operating Instruction
page - 5
1.2 Safety instructions
The CNC-controllers iMC-B and iMC-V are designed in conformability
to current technical and recognized rules.
The device may only be used if it is in correct condition. Any faults
have to be eliminated immediately. Neither children nor non-
authorized persons are allowed to put the device into operation.
The device may only be used for the intended purpose: control of 2
up to 6 linear or rotational axes with brushed DC Servo (iMC-B) or
brushless DC servo motors (iMC-V), both motor types with integrated
incremental measurement system (encoder).
All work with the controllers iMC-B and iMC-V, especially initial
operation, installation as well as external wiring must be executed by
authorized personal regarding electrical industry rules and accident
prevention regulations.
Assembly and use of operating material has to be according to
Machine directive 98/37/EC (valid until 28/12/2009) resp. 2006/42/EC
(becomes operative from 29/12/2009) and Low voltage directive
73/23/EWC. In case of in proper use even the observation of the
respective rules and standards does not protect against physical
damages and damage to property.
Do not expose the device to high humidity or high vibrations.
Please take care of the instruction manual. Be sure that all users
know the instructions.
Ignoring the instruction manual can lead to damage, heavy physical
damage or to death.
