Iseki SF310, Руководство оператора, Страница: 66 / 92

SF310,370
64
a. After draining out the transmission oil, detach the rub-
ber hose,2, connecting the suction filter and the suc-
tion pipe,3, by removing the hose clips,4.
b. Draw the suction filter out of the transmission case.
c. Wash the filter in fresh cleansing oil.
IMPORTANT: The inside of the removed hose should
also be cleaned.
d. Install the cleaned suction filter into the transmission
case, taking care not to deform the O-ring,5.
e. Connect the rubber hose and tighten both ends with
the hose clips.
IMPORTANT:
•
If a suction filter is found damaged during washing, it
should be replaced whit a new one
24. REDUCTION GEAR CASE OIL REPLACEMENT
IMPORTANT:
•
The oil in the reduction gear case should be replaced
after the initial 50 hours of operation and then after
every 300 hours of operation.
The reduction gear case drain is located on the bottom of
the case on the left-hand side of the front mower.
a. Place a tray under the drain plug,1.
b. Remove the drain plug using a spanner or wrench.
c. After the oil has drained out completely, wrap the
threads of the drain plug with sealing tape and screw
the drain plug back in securely.
IMPORTANT: Before re-installing the level plug, wrap the
threads of the plug with sealing tape. If
not, oil may leak out through the plug.
d. Pour fresh gear oil through the filler located below the
fuel tank in referring to “4. REDUCATION GEAR CASE
OIL LEVEL”.
Oil Gear oil SAE 80
Capacity 0.7 litre (0.15 lmp. gal. )
(1) Suction filter (5) O-ring
(1) Drain plug (2) Reduction gear case
(3) Engine oil pan
1
5
FIG. 103
1
2
3
FIG. 104