manualshive.com logo in svg

Iseki SF310, Руководство оператора, Страница: 18 / 92

Поделиться
Скачать
Iseki SF310 Скачать руководство пользователя страница 18

16

SF310,370

7. WHEN FILLING WITH FUEL

DANGER : Fuel is highly flammable and explo-
sive. Take the following precautions.

7.1.  

Do not add or drain fuel indoors, while smoking, or 
near a source of flame.

7.2.  

Do not remove the fuel tank cap or add fuel to the 
tank while the engine is running or hot. Wait until the 
engine cools down sufficiently.

7.3.  

Do not completely fill the fuel tank. Add fuel to the 
tank until the level inside the tank is just below the 
bottom of the filler neck. The empty space allows 
the fuel to expand.

7.4.  

If you spill fuel, clean it up and do not attempt to 
start the engine until the vapour has dissipated.

7.5.  

When fuelling under certain circumstances, a static 
charge may develop and ignite the fuel.

7.6.  

Use only an approved fuel container to store fuel.

7.7.  

Do not store the front mower or the fuel container 
near a source of open flame, such as a water heater.

7.8.  

Replace all fuel tank and container caps securely.

7.9.  

To prevent personal injury and property damage, do 
the following:

  - 

 

 Always place fuel containers on the ground and 
away from the vehicle before fuelling.

  - 

 

 Do not fill the fuel container(s) inside a vehicle or 
on a truck or trailer bed.

  - 

 

 When practical, remove a fuel-powered the front 
mower from the truck or trailer and refuel it with its 
wheels on the ground.

  - 

 

 If it is not practical to do this, refuel the front mower 
on a truck or trailer from a portable container, not 
fuel dispenser nozzle.

  - 

 

 If you must use a fuel dispenser nozzle, keep the 
nozzle in contact with the rim of the fuel tank or 
fuel container opening until you have completed 
fuelling.

8.   MOUNTING AND DISMOUNTING OF THE MOWER 

DRIVE SHAFT

The mower gear box is driven through a drive shaft with 
universal joints from the front mower. When connecting or 
disconnecting the shaft, follow the next instructions.

8.1.  

Lower the mower deck onto the ground, stop the 
engine, draw the engine key, and apply the parking 
brakes before mounting or dismounting the drive shaft. 

FIG. 15

Содержание SF310





























































































Отзывы:

Нет отзывов