IRIS 3010, Руководство пользователя

Страница: 3 / 145

User Information
Please read the following information on product safety and interference
potential.
Computer and CRT:
WARNING - For continued protection against risk of fire, replace fuses only
with the same type and rating of fuse.
No operator-serviceable parts inside unit.
Class A Computing Device
WARNING: This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instruction
manual, may cause interference to radio communications. It has been tested
and found to comply with the limits for a Class A computing device pursuant
to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be required to
take whatever measures may be required to correct the interference (FCC, Part
15.818 a).
Instructions to User
This equipment generates and uses radio frequency energy and if not installed
and used properly, ie., in strict accordance with the operating instructions,
reference manuals, and the service manual, may cause interference to radio or
television reception. It has been tested and found to comply with the limits for
a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules,
which are designed to provide reasonable protection against such interference
when operated in a commercial installation.
If this equipment does cause interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient the receiving antenna.
2. Relocate the equipment with respect to the receiver.
3. Move the equipment away from the receiver.
4. Plug the equipment into a different outlet so that equipment and receiver
are on different branch circuits.
If necessary, consult a Silicon Graphics field engineer for additional
suggestions.
Silicon Graphics is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. It is the responsibility of the
user to correct such interference.