IRIS 3010, Руководство пользователя, Страница: 18 / 145

2-6 IRIS OWNER’S GUIDE
SERIES 3000 Version 1.0
Hardware Installation
2.2 Keyboard and Mouse Connection
Connect the mouse to the keyboard by inserting the mouse cable in either the
right-hand or left-hand nine-pin D connector in the keyboard. Secure the
mouse connector to the keyboard with the two retaining screws on the
connector. Connect the keyboard to the IRIS by inserting the keyboard cable
into
Port 1
of the standard I/O panel on the IRIS.
2.3 Monitor to Cabinet Video Connections
The procedure for connecting the monitor to the IRIS is different for each type
of monitor.
2.3.1 Nineteen-inch 60 Hz Non-interlaced Monitor
Use the color-coded coaxial video cables to connect the monitor to the cabinet
(see Figure 2-4).
1. If you are using only one monitor, plug the terminators into the
unused video connectors. The terminators are attached to the
monitor by chains.
To connect several monitors in a series (daisy chain), remove the
terminators from all but the last monitor. Plug the terminators on
the last monitor into the unused video input sockets.
Attach the outgoing video cables to the unused BNC connectors on
the back of the monitor.
2. Connect each color-coded cable end to the corresponding input
socket on the monitor back panel.
Push each cable into its connector and rotate to lock into place.
3. Connect the other end of each color-coded cable to the
corresponding output socket on the standard I/O panel.
Push each cable into the connector and rotate to lock into place.