IRIS 3010, Руководство пользователя, Страница: 97 / 145

6. Press
RETURN
.The entry below appears.
a: base; (1) size; (150)
Press
RETURN
to accept this entry. This entry indicates that partition
md0a begins at cylinder 1 and has a size of 150 cylinders.
Partition md0a is the root partition and does not change.
7. To add 100 cylinders to the swap partition ( md0b ), 100 cylinders
must be subtracted from the user partition ( md0c ). The base, or
beginning, of partition c changes by 100 cylinders. Type the revised
entries after the numbers in parentheses:
Vertex:
b: base; (151) size; (149)249
c: base; (300)400 size; (586)486
Maxtor:
b: base; (151) size; (149)249
c: base; (300)400 size; (670)570
8. Continue to press
RETURN
until the workstation displays the
Set?
prompt.
9. Enter
q
twice to quit both the
set
function and
mdfex
. The
workstation displays the
mdfex
prompt and the message:
Quit
Label on drive 0 needs updating... do it?
10. Confirm your intention to update the drive label by entering
y
. The
workstation displays the message:
--confirm quit with ‘y’:
11. Type
y
to confirm your intention to quit
mdfex
and return to the
PROM monitor. The PROM monitor prompt appears.
12. Boot the system in single-user mode:
b
Version 1.1 SERIES 3000
IRIS OWNER’S GUIDE 6-5 Disk Configuration