IRIS 3010, Руководство пользователя

Страница: 43 / 145

4. Workstation System Administration
The system administrator is responsible for configuring the IRIS workstation to
meet local requirements and for maintaining the installed system. This chapter
covers the following procedures:
Section Topic
4.1 Basic Operation and Shutdown
4.2
U
nix
Configuration
4.3 Network Communication
Naming the workstation
Adding user accounts
Booting into multi-user mode automatically
U
nix
configuration files
Special device files in /dev
XNS network commands
Using multiple kernels
4.4 Backups Making a bootable tape
Making periodic backups
Storing key U
nix
files on a second disk
4.5 Crash Recovery Recovering from a crash by:
• using init
• booting from tape
• booting from the second disk
4.1 Basic Operation and Shutdown
If you have not yet installed and booted the workstation, see Chapters 2 and 3.
For a description of the startup environment, see Section 3.3.
The IRIS workstation boots into single-user mode, which should be used only
for system maintenance. For normal operation, the workstation must be put in
multi-user mode, as described in Section 3.3. Section 4.2 explains how to
configure the workstation to boot into multi-user mode automatically.
Version 1.0 SERIES 3000