Iran Tractor ITM 950, Инструкция для оператора, Страница: 86 / 106

4
Maintenance and adjustment
79
Number plate light 5 watt.
Fig. 52:
1
3
2
To change a bulb:
1. Switch off the light.
2. Loosen the screw (1) and remove the
cover (2).
3. Remove the failed bulb (3) from its fit-
ting.
4. Fit a new bulb as detailed above, refit
the cover and tighten the screw.
Rocker switch bulbs (Figs. 53 and
54)
The rocker switches are internally il-
luminated, the bulbs being removable from
the rear of the switch assembly. To re-
place the bulb:
Fig. 53:
1
2
3
4
1. Remove the screws retaining the switch
panel (1 Fig. 53)
2. Remove the wiring plugs (2) from the
switch (3) with the failed bulb.
3. The switch is retained by a sprung tag
(1 Fig. 53) at either end. Press in the
tags and remove the switch assembly.
4.To change the bulb, press in tag (2 Fig.
53) using a small screwdriver and pull
the bulb retainer (3) from the back of
the switch.
5. The bulb (4) is of the capless type, and
is a push fit in the retainer.
6. After changing the bulb, push the re-
tainer into the back of the switch until
the tag locates in the aperture.
7. Replace the switch, plugs and panel.
FUSE BOX
Fuse replacement
The single fuse box is located under the
dashboard in front of driver (Fig. 54). The
fuses in the fuse box protect five different
circuits as detailed in table below (Fig. 55).
Fig. 54:
The Table 4-6, shows the electric cir-
cuits of fuse mentioned in Fig. 54.