Iran Tractor ITM 950, Инструкция для оператора

Страница: 37 / 106

2
Controls and instruments 30
To stop the engine, pull the control
fully OUT to cut the fuel supply to the in-
jectors and stop the engine. Push the con-
trol fully in before starting the engine.
Controls — GENERAL
Leveling lever (Fig. 16 )
The 3 point hitch has a leveling device
which can be operated from the rear of
the tractor. To operate the control, turn
the cranked handle clockwise to raise the
lower link or anti-clockwise to lower the
lower link.
Fig. 16:
Plough light (Fig. 17)
The plough light is operated by a rotary
switch on the back of the light.
Fig. 17:
Trailer socket (Fig. 18)
Fig. 18:
This is a seven pin socket for trailer
electrical connections. Before using, en-
sure that the trailer plug is correctly wired
up.
SEAT
Spring suspension seat (Fig. 19)
To adjust the seat for height proceed
as follows:
1. Weight adjustment - For maximum
comfort it is important that you set
the suspension to suit your individual
weight.
Whilst seated, check the position of
the weight indicator (4). If the seat is
already correctly set, the detent and
operator corresponding weight (fixed
arrow) of the indicator should be level
with one another. If detent is below the
fixed arrow then the seat suspension
needs stiffening by turning the adjust-
ment knob (1) clockwise. If the detent
is above the fixed arrow then soften
the seat suspension by turning the ad-
justment knob (1) counter clockwise.
Test the seat suspension by alternately
applying and releasing your full weight
from the seat. If the detent return to