IPG RSA 2024-SB, Руководство по эксплуатации и список запасных частей

Страница: 37 / 117

UM122TW / UM622TW UDM10012
37
O
PERATING
I
NSTRUCTIONS
Bottom Only Mode:
This mode is used for sealing the bottom seam of a random sized cases. In this mode, the top
tape head box remains in the “home” position at all times.
1. Ensure that the compressed air is plugged in and at 90 PSI.
2. Turn the control selector placed under the start button to "BOTTOM" (Bottom Only).
3. Press the start button, the drive belts will start.
4. The Top Tape Head Box will move to its highest position and remain there.
5. Present the case over the front sensor, up to the steel gate.
6. The drive bases will then close on the case to carry it over the bottom tape head.
7. The machine resets when the case clears the exit sensor.
Clear Mode:
This mode is used to clear a jammed case without the need for the e-stop.
Note: While in “Clear” mode, the top tape head box and the side belt drives will return to their
“home” position. The belts will cease operation but the machine will continue to be
powered throughout. If electricity needs to be cut off throughout the machine, use the
e-stop buttons located on the control box and on the top tape head box.
1. Ensure that the compressed air is plugged in and at 90 PSI.
2. Press down on the control mushroom button located on the top of the Control Box to set
machine to “Clear” mode.
3. Remove jammed case.
4.
Pressing the “Clear” mushroom button a second time will return the machine to chosen
operational mode.
Warning! Ensure that the operator's hands are away from the moving belts of
the side drive base assembly. Do no place hand on the front edge of
the case while it is entering the machine.
Note: Should any problem occur during processing that requires halting the machine, press
the red "E-Stop" mushroom button.
Note: The machine should never be washed down or subjected to conditions causing
condensation on components.