IPG RSA 2024-SB, Руководство по эксплуатации и список запасных частей

Страница: 36 / 117

UM122TW / UM622TW UDM10012
36
O
PERATING
I
NSTRUCTIONS
Once the Tape Heads (both bottom and top) have been loaded with tape and threaded (refer to
the appropriate Tape Head manual for loading and threading instructions) the machine is ready
to process regular slotted cases. The following instructions are presented in the order
recommended for processing cases successfully through the RSA 2024-SB Case Sealing
machine.
The RSA 2024-SB Case Sealer has three operating modes. The operator selects these modes,
using the 2-position switch and push button located on the Control Box. Refer to
Figure-28 .
When the case sealer is turned on, the top tape head box will rise to uppermost position and
side belt drives will come out to their outermost position. These positions are referred to as their
“home” positions.
Figure-28
Automatic Mode:
This is the standard operating mode of the machine. In this mode, the Top Tape Head Box will
retain its previous height, helping increase throughput speed, and the side belt drives will travel
to “home” position until case arrives. When a case is being processed, the top tape head box
will match case size; side belt drives will move in towards the box and carry case through the
exit of the machine.
1. Ensure that the compressed air is plugged and at 90 PSI.
2. Turn the selector switch on the control box (
Figure-28 ) to "AUTO" (Automatic).
3. Press the start button, the drive belts will return to “home” position.
4. Introduce a case with the flaps held in the closed position and advance to the indexing
gate so the proper sensor is activated. Do not place hands in front of case.
5. The Top Tape Head Box will descend to set itself at the height of the case.
6. When the bottom paddle is depressed and the bottom switch is covered, the side drives
will close.
7. The case will be processed and tape applied to top and bottom center seams.
8. Once the case is processed and exits the machine, the exit sensor is cleared and the
side belt drives will return to “home” position.
“CLEAR” mode
button
“AUTO/BOTTOM”
mode selector switch
“Emergency Stop”
button
“Start”
button