IPG RSA 2024-SB, Руководство по эксплуатации и список запасных частей

Страница: 46 / 117

UM122TW / UM622TW UDM10012
46
P
REVENTIVE
M
AINTENANCE
Tape Head Preventative Maintenance Chart
Item Action Required Material Weekly Monthly Quarterly
Blade Guard Oiler Pad Lubricate Lightweight oil X
Hardware Re ‐ tighten any loose hardware X
Replace any missing hardware X
Cutter Blade Inspect for wear X
Clean Solvent Cleaner X
Mandrel Assembly Disassemble & Observe X
Mandrel Spring Check for weakness None X
Mandrel Friction Washer Clean Solvent Cleaner X
Mandrel Metal Washer None None X
Mandrel Shaft Remove any dust and adhesive build up Solvent Cleaner X
Mandrel Bearing Check for wear None X
Peel Roller X
Delrin Roller Check for free spinning. Disassemble
and remove any adhesive build up. Solvent Cleaner
X
Pivot Shaft Check for any restriction Solvent Cleaner X
Peel Roller Spring Check for weakness X
Plastic Guide Rollers Check for free spinning. Disassemble
and remove any adhesive build up. Solvent Cleaner
X
Knurled PTFE Coated One
Direction Clutch Roller
Back off tension. Check for free spinning.
Disassemble and remove any adhesive
build up. Solvent Cleaner
X
Knurled PTFE Coated Guide
Roller
Rotation should be slightly restricted by
Belville washer. Disassemble and
remove any adhesive build up if
excessive restriction is detected Solvent Cleaner
X
Front Red Wipe Down Roller Rotation should be slightly restricted by
Belville washer. Disassemble and
remove any adhesive build up if
excessive restriction is detected Solvent Cleaner
X
Rear Red Wipe Down Roller Check for free spinning. Disassemble
and remove any adhesive build up. Solvent Cleaner
X
Main Spring Remove and inspect for any wear or
weakness. Replace as necessary.
X
Knife Spring Remove and inspect for any wear or
weakness. Replace as necessary.
X
Tape Shoe Guide Flat Spring Inspect for any wear or weakness.
Replace as necessary.
X
Wipe Down Brush Inspect for any wear or weakness.
Replace as necessary.
X
Main Applying And Wipe
Down Assembly
Remove Main Spring and check for any
restrictions when assembly is in motion
Worn bearings,
bent shafts, bent
roller arms
X
Knife Arm Assembly Remove Knife Spring and check for any
restrictions when assembly is in motion
Worn bearings,
bent shafts, bent
roller arms
X
Frequency
Refer To Assembly Drawings For Part Numbers Of Replacement Parts If Required