IPG RSA 2024-SB, Руководство по эксплуатации и список запасных частей

Страница: 21 / 117

UM122TW / UM622TW UDM10012
21
S
PECIFICATIONS
“Optional” Case Size
To run cases with sizes that fall within the
parameters set in the “Optional” Case Size
chart in
Page 20 , remove the rear bottom
gap filler as shown in Figure-5 .
Case Processing Stability
For optimal performance, the cases should be stable when processing through the machine.
Unstable cases may tilt backwards upon contact with the upper tape head causing the machine
to jam.
If the box length (in direction of seal) to box height ratio is .75 or less, then several boxes should
be test run to assure proper machine performance. The formula is as follows;
CASE LENGTH IN DIRECTION OF SEAL > .75
CASE HEIGHT
Figure-5
Top Tape Head Box
Assembly Removed For
Clarity.