IPG RSA 2024-SB, Руководство по эксплуатации и список запасных частей

Страница: 39 / 117

UM122TW / UM622TW UDM10012
39
O
PERATING
I
NSTRUCTIONS
2. Void and Overfilled Cases , cont’d.
For void cases:
For void cases reduce pressure on the Sensing Paddle ( Fig.29B ) by turning knob ( Fig.29A )
clockwise.
For fragile cases:
Adjust the speed of descent of the Top Tape Head Box with the use of the Flow Control Valves
(refer to "Speed of Descent of Top Tape Head Box” on the next page) so the Top Tape Head
Box moves slower. To prevent the Top Tape Head Box from overloading the top of the box, the
operator can adjust the air pressure on the BALANCE regulator as necessary.
Note: Always have a minimum amount of pressure applied to the Sensing Paddle for cases
either void, overfilled, or fragile. Excessive spring force on Sensing Paddle may cause
cases to rip or damage. Likewise under pressured Sensing Paddle will cause erratic
Top Tape Head Box movement when head rises.
3. Speed of Descent of Top Tape Head Box
If the Top Tape Head Box lowers on the boxes too quickly, the flow controls at the bottom of the
side cylinders need adjustment (
Figure-30 ). Using a flat head screwdriver, turn clockwise to
slow the descent and counter-clockwise for a faster descent. Both cylinders should be adjusted
the same amount and should be done 1/8 of a turn at the time.
Figure-30
Flow Control
Adjustment
Flow Control
Adjustment