IPC APTA40008, Инструкция по эксплуатации

Страница: 12 / 24

English
- 12 -
Contact our technical service centre.
- Do not use the equipment if the power
cable is damaged. To replace it, contact our
technical service centre only.
APPLICATIONS
The equipment is intended solely for the production of pure
water used for cleaning solar/photovoltaic panels, windows,
vehicles, and washable surfaces typically through standard
and optional accessories provided by the manufacturer. The
produced water is not used for human consumption. Do not
use 'equipment in case of rain, snow, etc.. Any other use is
considered improper and unreasonable.
Examples of improper and/or incorrect use:
- Using the equipment in the rain, frost or strong winds.
- Clean surfaces not suitable for treatment with pure water.
- Using the appliance to clean animals, people, etc.
- Changing attachments while pure water is being emitted.
- Cleaning the appliance with water jets.
- Using the appliance with wet hands and/or feet.
- Leaving the appliance unsupervised while running.
- Moving the appliance by pulling the electric cable.
- Using the appliance with a damaged electric cable.
- Using the appliance without the guards (panels, grills).
- Obstructing ventilation and heat dispersal apertures or slits
Use only original accessories offering maximum quality and
security. Failure to use original accessories absolves the manu-
facturer from all liability.
OPERATING PRINCIPLE
This unique, patent pending system incorporates all of the water
treatment components into a single pressure vessel resulting in
a light weight, high performance, easy use, compact machine.
Water supplied to the unit enters the pressure vessel at the
bottom end by the transport wheels. It flows first through a
combination sediment/carbon block filter. The sediment filter
removes solid particulates down to 5 micron in size. The carbon
block absorbs and removes chlorine from the water. It is very
important to change this filter as prescribed in this manual.
The carbon block will become saturated and the chlorine will
pass through it and cause damage to the RO membrane.
The Electric machine uses an electric motor to boost the feed
water pressure up to 8 bar. This higher feed water pressure
produces a much higher volume of pure water. It also has a con-
centrate recirculation system to decrease waste water volume.
Next this pretreated water flows directly into the Reverse Osmo-
sis (RO) membrane. RO is more like a separation process than
filtration, which traps and collects the targeted material. The
water molecules are separated from the water flow and move
to the center core tube where they collect. This is called product
water. The product water flows directly into a deionizing resin
(DI) cartridge and then out the pure water discharge port on the
end of the appliance by the handle. The RO membrane removes
99% of the Total Dissolved Solids (TDS) from the supply water.
The deionizing resin removes the remaining 1% of the TDS.
The manufacturer declines all liability for
damage caused by faulty earthing of the
appliance.
- The equipment can be disconnected from
the mains only by unplugging the plug from
the mains socket.
- The equipment s not intended for use by
children, adolescents or persons with redu-
ced physical, sensory or mental capabilities,
under the influence of alcohol or lacking
experience and knowledge.
Children must be supervised to ensure they
do not play with the equipment.
- Keep people away from the appliance while
it is working.
- Do not use the appliance in the rain, snow,
freeze.
- If the appliance breaks down or malfunc-
tions, turn it off. Do not attempt to repair it.
Contact our technical service centre.
- Do not clean the appliance with water jets.
- Use suitable personal protection (gloves,
masks, etc)
- When using any electrical appliance, cer-
tain fundamental rules should be respected:
• do not touch the appliance with wet hands
or feet;
• do not use the appliance with bare feet or
unsuitable clothing;
• do not pull the power cable or appliance
itself to unplug the plug from the mains.
- Do not obstruct ventilation and heat disper-
sal apertures or slits.
- If the appliance breaks down or malfunc-
tions, turn it off. Do not attempt to repair it.