inventum HK 2, Инструкция по эксплуатации

Страница: 22 / 28

Problem
the coffeepadmachine doesn’t work.
Causes
1. the appliance is not plugged in.
2. the appliance is not placed correctly on the base.
3. the fuse in the fuse box has blown.
Solutions
1. plug the appliance in.
2. place the appliance correctly on the base.
3. check the fuses in the fuse box.
Problem
too small amount of coffee.
Causes
The reservoir was not filled with enough water.
Solutions
fill the reservoir slowly with water. Because of the
divided reservoir the water will sink slowly to the
bottom of the reservoir. Therefore wait after the first
time you have filled the reservoir and always check a
second time that the reservoir is filled with sufficient
water for the number of cups you want to make. fill,
if necessary, the reservoir with the needed amount of
water.
If your problem is not solved, please contact our technical
department or return the coffeepadmachine to your
supplier.
We advise to clean the coffeepadmachine on a regular
bases. regular cleaning will prolong the life of your
appliance and will guarantee optimal brewing results.
please do as follows:
check before cleaning if the appliance is unplugged.
clean the outside of the appliance
with only a damp cloth and dry it
with a dry cloth.
take the coffeepadmachine from
the base.
Open the lid and take the multi-
padholder and if necessary the
waterlevelindicator (see: picture)
out of the coffeepadmachine.
take the grid from the driptray and remove the driptray
from the base. clean the multi-padholder, the grid, the
driptray with warm water and some washing up liquid.
these parts can also be cleaned in the dishwasher.
to prevent the cremamaker on the multi-padholder from
getting clogged, pierce the holes regularly with a needle.
22
After using pads which contain milk(powder), for
instance cappuccino-pads, you must thoroughly clean
the cremamaker to prevent clogging.
Because of its low voltage of 800 Watts and compact
shape, this coffeepadmachine is extremely suited to take
along on a holiday.
When something unexpected happens while making
coffee (e.g. because the pads are not placed correctly),
take the coffeepadmachine of the base and the device
will immediately shut off.
Attention:
if you place the
device back on the base it will restart. you can leave the
appliance on the base because the light will automatically
go out. you can also place the device next to the base
until the next use.
When a problem occurs with the coffeepadmachine, read
the following instructions for a solution.
Attention! pressure is build up in the appliance.
Therefore leave the appliance to cool down completely
before opening in case of a malfunction.
Problem
Steam comes through the rim of the lid.
Causes
1. the lid is not properly locked.
2. the pads are not placed correctly.
3. the cremamaker is clogged.
Solutions
• take the appliance from the base and leave it to
cool down. attEntIOn! pressure is build up in the
appliance. therefore leave the appliance to cool
down completely before opening in case of a
malfunction. After cooling, open the lid, refill the
water and if necessary replace a pad.
• check the cremamaker for obstructions. pierce
the holes in the cremamaker with a needle. for
extended instructions read the chapter cLEanIng &
maIntEnancE.
• Lock the lid properly. read chapter maKIng cOffEE
for more instructions.
Problem
no crema (foam) on the coffee.
Causes
1. the cremamaker is not placed on the multi-
padholder.
2. the cremamaker is clogged.
Solutions
1. place the cremamaker on the multi-padholder.
2. check the cremamaker for obstructions. pierce
the holes in the cremamaker with a needle. for
extended instructions read the chapter cLEanIng &
maIntEnancE.
7 | CLEANING & MAINTENANCE
6 | ProbLEms & soLutions