
5. If lights are present, disconnect the front lights connector
E
and the light power cable connector
F
from the rear
lighting harness
G
inside of the rear shroud.
Installing the Rear Shroud Assembly
1. If lights are present, connect the front lights connector
E
and the light power cable connector
F
to the rear lighting
harness
G
inside of the rear shroud. Ensure they are
connected in the proper location, marked by the labels on
each cable.
2. Install the keyhole
C
in the bottom of the rear shroud
assembly
A
onto the pegs
D
on the battery box
B
, one
side at a time.
3. Rotate the top of the rear shroud assembly forward under
bumper screws
H
, if present. Route the cables:
Fig. 10-3 Installing the Rear Shroud Assembly - Routing the
lighting and motor cables
A. Route motor cables
I
and light cables
J
through the
top opening in both sides of the rear shroud.
B. Group other cables
K
and route through the front
right opening in the top shroud.
76
60101916-A
Invacare® AVIVA™ FX
Содержание AVIVA FX
Страница 106: ...Notes...
Страница 107: ...Notes...