2. Connect the battery charger to the charger socket.
The charger connector pins are identified in the
following ways:
l
Pin 1
A
— Battery Plus (+)
l
Pin 2
B
— Battery (-)
l
Pin 3
C
— Inhibit
3. Connect the battery charger to the power supply.
7.4.4 How to Disconnect the Mobility Device After Charging
1. Once charging is complete, disconnect the battery charger
from the power supply.
2. Disconnect the plug from the remote.
7.4.5 Storage and Maintenance
Follow the instructions listed below to ensure safe use and
longevity of the batteries:
l
Always store the batteries fully charged.
l
Do not leave the batteries in a low state of charge for an
extended length of time. Charge a discharged battery as
soon as possible.
l
In case your mobility device is not used for a longer period
of time (that is more than two weeks), the batteries must
be charged at least once a month to maintain a full charge
and always be charged before use.
l
Avoid hot and cold extremes when storing. We
recommend to store batteries at a temperature of
59°F (15 °C).
l
Gel and AGM batteries are maintenance-free. Any
performance issues should be handled by a properly
trained mobility device technician.
7.4.6 Using the Proper Batteries
WARNING!
Risk of Injury or Damage
Improper configuration of battery terminals may
cause injury or damage.
-Batteries with terminal configuration as shown
MUST be used.
-The POSITIVE (+) battery cable MUST connect to the
POSITIVE (+) battery terminal.
-The NEGATIVE (-) battery cable MUST connect to the
NEGATIVE (-) battery terminal.
-DO NOT allow any of your tools and/or battery cables
52
60101916-A
Invacare® AVIVA™ FX
Содержание AVIVA FX
Страница 106: ...Notes...
Страница 107: ...Notes...