Fig. 8-2 Seat Tie-Down Points—Wheelchairs with Ultra Low
Maxx Seats and Elevate
1. Secure the mobility device with the tie-down system belts
at the following locations:
All Wheelchairs — four tie down points
C
on the
wheelchair base (two at the front and two at the rear).
Systems with Ultra Low Maxx Seats and Elevate (TRRO-E)
— two additional tie down points
B
on either side of the
seat at the front of the seat rails.
2. Secure the mobility device by tensioning the belts
in accordance with the tie-down system
manufacturer's user manual.
8.5.2 How The User is Secured Within the Mobility Device
CAUTION!
Risk of injury if the user is not properly secured
within the mobility device
-Even if the mobility device is equipped with a
posture belt, this is no substitute for a proper safety
belt which complies with ISO 10542 in the transport
vehicle. Always use the safety belt installed in the
transport vehicle.
-Safety belts must be in contact with the user's body.
They must not be held at a distance from the user's
body using parts of the mobility device such as
armrests or wheels.
-Safety belts must be pulled as tightly as possible
without causing the user discomfort.
-Safety belts must not be positioned while twisted.
-Ensure that the third seat belt anchorage point is not
fixed directly to the vehicle floor, but to one of the
vehicle uprights.
60101916-A
61
8 Transport - ISO 7176-19
Содержание AVIVA FX
Страница 106: ...Notes...
Страница 107: ...Notes...