6.7.3 Installing the push bar
—
■□□
1.
Place both clamping parts
B
on the ends of the backrest
tubes
C
. Make sure that the holes of the clamping parts
are aligned with the holes of the backrest tube ends.
2.
Insert the push bar
A
into the backrest tubes.
3.
Move the push bar to the required height (Pos. 1 –
5) and secure by turning the levers
D
of the clamping
part clockwise.
4.
To remove the push bar reverse steps 3 to 1.
Adjusting the height
1.
Loosen both clamping parts
B
by turning the levers
D
counterclockwise.
2.
Move the push bar
A
to the required height and secure
by turning the levers
D
of the clamping part clockwise.
6.7.4 Installing the Drip Stand
To install the drip stand the wheelchair has to be equipped with the push bar.
—
■□□
1650187-A
25
