1.
Dismount the transversal bar
D
with the form washer
G
from the vertical brace
H
by removing the adapter
sleeve
J
and washer
I
on both sides.
2.
Install the antitipper shoe
F
to the antitipper tube
A
using bolt
E
.
3.
Install the antitipper tube to the transversal bar
D
using
the flange
B
and bolts
C
. Do not completely tighten
the bolts.
4.
Position the antitipper
A
at a distance of 35 mm
measured from the end of the axis
K
.
5.
Tighten the bolts
C
.
6.
Install the second antitipper in the same way on the
other side.
7.
Reinstall the transversal bar with the antitippers to the
vertical braces.
C
= 16 Nm
E
= 7 Nm
J
= 45 Nm
6.7.2 Installing the transportation bearing
Allen key (4 mm , 5 mm) / Socket spanner (22 mm)
■■□
1650187-A
23
