1.
Slide the backrest shroud
A
from above over the
backrest frame
B
.
2.
Mount the backrest shroud through its holes
H
to the
backrest tube using bolts
G
.
3.
Place the rubber spacers
C
into the holes of the
backrest shroud.
4.
Position the backrest plate
D
to the required height
(see table below).
5.
Mount the backrest plate to the backrest using bolts
E
.
6.
Remove the protective film from the adhesive surfaces
J
of the backrest cushion
I
.
7.
Glue the backrest cushion to the backrest plate by
positioning it flush and pressing it against it.
8.
Remove the backrest plate and cushion by reversing
steps 7 to 1.
E
= 6 Nm
G
= 6 Nm
Adjusting the backrest height
The backrest height depends on the mounting position of the backrest plate. The following 4 heights are possible.
Backrest height [mm]
Mounting position
425
Pos. 1
450
Pos. 2
475
Pos. 3
500
Pos. 4
1650187-A
15
