1.
Install the plastic casing
A
to the holder bar
F
using
bolts
B
, spacers
C
, clamps
D
and nuts
E
.
2.
Install the holder bar assembly to the cross brace
G
using the U-bolt
H
and nuts
I
.
3.
Install the can holder strap
J
to the backrest fixation
part
L
using the bolt
K
.
I
= 20 Nm
E
= 7 Nm
K
= 7 Nm
6.7.6 Installing the oxygen holder
Allen key (5 mm) / Socket spanner (17 mm) / Wrench (10 mm)
■■□
1.
Mount the oxygen holder tube
A
to the supporter tube
D
in the required position (Pos. 1 – 5) using bolts
C
and nuts
B
.
The oxygen holder is standard-mounted in
position 2.
2.
Install the oxygen holder assembly to the cross brace
G
using U-bolts
F
and nuts
E
.
B
= 8 Nm
E
= 20 Nm
6.7.7 Installing the tie-down shackles
Allen key (5 mm) / Socket spanner (10 mm)
■□□
1650187-A
27
