intrepid KM100, Руководство пользователя, Страница: 23 / 54

4 Daily use
4.1 Starting
Safety
Warning: Do not exceed the maximum loading. For the specifications, see
chapter
#
.
Preparation
1. Make sure that the daily maintenance has been carried out. See section
5.1
.
2. Check the fuel level and the hydraulic fluid level. Top up the relevant tank if
necessary.
• Topping up the fuel: see sectie
4.7
.
• Check and top up the hydraulic fluid: see section 5.11 .
3. If you are going to drive in a dusty environment, make sure the pre-filter is usable. If
necessary, clean or replace the pre-filter. See section
5.2
.
4. Make sure that the following controls are in the neutral position:
• Driving direction lever
• Boom lever
• Both levers for the auxiliary hydraulic functions
5. Sit on the driver's seat before starting the machine.
6. Adjust the driver's seat if necessary.
7. Put on the seatbelt and click it tight.
Start the machine
1. Insert the ignition key into the
ignition.
2. Turn the ignition key to the 'ON'
position. Check that the following
lamps are lit:
a) Battery voltage lamp
b) Oil pressure lamp
3. Turn the ignition key to the 'GL'
position. Wait until the pre-heat lamp
goes out.
4. Turn the key to the 'ST' position and
release the key as soon as the
engine is running.
ON
OFF
GL
ST
Daily use
11 - 002 - 30.08.2018 23