manualshive.com logo in svg

intrepid KM100, Руководство пользователя, Страница: 22 / 54

Поделиться
Скачать
intrepid KM100 Скачать руководство пользователя страница 22

3.7

Driver’s seat

C

B

D

B

A

A

Lever for adjusting the driver's seat

forwards and backwards

C Knob for adjusting the backrest

B

Knob for driver weight adjustment

D Handle for adjusting the backrest

angle

Depending on the type of machine, the adjustments of the driver's seat may differ.

3.8

Operating principle: driving the wheels

Hydraulic wheel motors drive the wheels of the machine, one motor per wheel. The

hydraulic pressure comes from a hydraulic pump that is driven in turn by a diesel engine.
The gas pedal of the machine controls the speed of the diesel engine and thus indirectly

the power and the speed of the hydraulics. The inching pedal can be used as a brake

pedal.

Example

You can use the inching pedal simultaneously with the gas pedal, for example to

drive slowly across rough terrain or to lift heavy loads slowly. Simultaneously

operate the gas pedal (for the power) and the inching pedal (to limit the speed).

When you press the inching pedal all the way in, the machine stops.

Description

22

11 - 002 - 30.08.2018

Содержание KM100























































Отзывы:

Нет отзывов