intrepid KM100, Руководство пользователя, Страница: 10 / 54

2 Safety
2.1 Intended use
The machine is made for carrying out excavation and transport work in road construction,
landscaping and related sectors. By connecting and disconnecting interchangeable
accessories, the machine can be used for different applications.
Use only interchangeable accessories intended for your machine and that have been
approved by the manufacturer.
2.2 Safety instructions
2.2.1 Using the machine
• Read the manual carefully before using the machine.
• Carry out the procedures in the order shown and complete the procedures.
• Keep this manual with the machine. If there is no manual, report it to your employer.
• Replace a damaged safety cabin immediately.
• If there is a fault or damage to the machine, stop the machine and report it to your
employer. Make sure that the fault is resolved immediately.
• Do not modify the machine unless approved in writing by the manufacturer in
advance.
• If the machine is fitted with an interchangeable accessory for which a periodic
inspection is required, proof of this inspection must accompany the machine at all
times.
• Use only interchangeable accessories from the manufacturer.
If using other interchangeable accessories, the manufacturer accepts no responsibility
for the use of the entire combination.
• When using an interchangeable accessory, subtract the weight of the interchangeable
accessory from the load values.
• Use the machine and the interchangeable accessory only as intended. If you want to
use the machine for another application, please contact the manufacturer.
• The manufacturer is not responsible for damage caused by improper use of the
machine or the interchangeable accessory.
• When replacing parts: always contact the manufacturer and only use parts that have
been approved by the manufacturer.
• Use personal protective equipment: safety clothing, safety footwear.
• Use hearing protection. The noise level is more than 93 dB(A).
• Keep the driver's seat, pedals and steps clean.
• Store materials and tools when you are not using them.
• Loads:
• Position loads only as indicated in this document.
• Do not exceed the maximum loading. For the specifications, see chapter
#
.
• Avoid asymmetrical distributions of the load.
Safety
10 11 - 002 - 30.08.2018