intrepid KM100, Руководство пользователя, Страница: 39 / 54

c) Wait 5 minutes and repeat steps 2 and 3 to check if the oil level is correct.
d) Replace the engine oil cap.
5. Close and lock the engine compartment.
5.10 Check/top up the coolant fluid level
Safety
Warning: Make sure the engine has cooled down sufficiently before carrying
out this procedure. Hot coolant fluid can spray out of the radiator.
Check
1. Open the engine compartment. See
section
5.5
.
2. Check whether the reservoir (A)
contains sufficient coolant fluid. The
fluid level must be between the
"FULL" and "LOW" marks.
3. If the reservoir is not properly filled,
top up the coolant fluid. See the
procedure below.
4. Close and lock the engine
compartment.
Topping up
1. Remove the cap (A) from the
radiator. First unscrew it 1 turn and
allow any overpressure to escape
before you completely remove the
cap.
2. Fill coolant fluid up to the 'FULL'
mark on the reservoir.
For the correct type of coolant fluid,
see section
7.1
.
3. Refit the radiator cap.
4. Close and lock the engine
compartment.
A
FULL
LOW
A
Maintenance
11 - 002 - 30.08.2018 39