intrepid KM100 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 54

intrepid KM100 Скачать руководство пользователя страница 4

©

All rights reserved by Miniloaders.com

Use of the operator manual
This operator manual provides detailed operating procedures for safe, effective and proper

machine use. The manual includes chapters about safe operation, machine specification,

maintenance and troubleshooting information.
Improper operation, inspection and maintenance of the machine can result in injury or death. Read

and understand the contents of this manual completely and become familiar with the machine

before operation. Contact your authorized dealer with any questions about information in this

manual or if you need extra manuals or manuals in other languages.
This manual is considered a permanent part of the machine and should be with the machine at all

times. Replace this manual promptly if it becomes damaged, lost, or stolen.
Change of ownership
If the machine is resold, include this operator manual as part of the sale.
Please provide your dealer or Miniloaders.com with the name of the current owner and any new

address, along with the machine model and serial numbers. This makes sure that the registered

owner receives any updated information and can be notified directly in case of an important

product issue, such as a safety update program.

Warning: Do not remove this operator manual from this machine.

Failure to obey safety, operating and maintenance instructions can result in serious injury to the

operator or bystanders, poor operation and costly breakdowns of the machine.
If you have any questions on proper operation, adjustment or maintenance of this machine, contact

your dealer before starting or continuing operation.

Introduction

4

«
...
2
3
4
5
6
...
»

Содержание KM100























































Отзывы:

Нет отзывов