intrepid KM100, Руководство пользователя, Страница: 32 / 54

5 Maintenance
5.1 Daily maintenance
Before you begin
Warning: Do not touch hot parts of the machine: engine, exhaust and
hydraulics.
About this task
The daily maintenance may be carried out by the machine operator or by someone with
an equivalent level of training.
Procedure
1. Lubricate the hinge points. See section 5.8.1 .
2. Ensure that the other periodic maintenance is carried out by a qualified service
technician. See section
5.4
.
3. Check the machine while it is switched off for the parts in section 5.2 .
4. Start the machine and check the machine for the parts in section
5.3
.
5. If a part is not in order, make sure that the problem is resolved. Where indicated, the
problem may be corrected by the operator. For resolving other problems, contact a
qualified service technician.
5.2 Maintenance table: maintenance with the machine switched off
Machine part Procedure Rejection criterion Action on rejection
Complete machine Visually check for dam-
age.
Visible damage. Contact a qualified
service technician.
Visually check for liquid
leakage. WARNING:
obey the safety instruc-
tions concerning hy-
draulic parts. See sec-
tion
2.2.6
.
Leakage of hydraulic
fluid, fuel, coolant or
battery acid.
Contact a qualified
service technician.
Tires Visually check for dam-
age or sharp objects
near or in the tires.
Damage or sharp ob-
jects near or in the
tires.
Contact a qualified
service technician.
Check the tire pres-
sure.
Tire pressure is outside
the specification as in-
dicated on the tires.
Adjust the tire pres-
sure.
Fan belt Check the tension. See
section
5.7
.
Movement of the belt
of more than 9 or less
than 7 mm.
Contact a qualified
service technician.
Engine oil Check the level. See
section 5.9 .
Engine oil level not cor-
rect.
Adjust the engine oil
level. Procedure: see
section
5.9
.
Maintenance
32 11 - 002 - 30.08.2018