2016-0685
2017-10-02
heating system only and the filtration system will operate for another
24 hours before it turns off automatically.
Celsius/Fahrenheit Toggle button:
The temperature can be displayed in either Fahrenheit or Celsius. The system’s
default is Fahrenheit.
Temperature Adjustment Buttons:
Pressing the
Temperature Increase or Decrease buttons will cause the LED to
flash. When flashing you can adjust to the desired temperature
setting. If you hold these buttons down the values will rapidly
increase or decrease. The new and desired temperature setting will
remain on the LED display for 5 seconds to confirm the new value.
NOTE:
The default temperature is 20°C (68°F).
NOTE:
Temperature adjustment ranges from 20°C (68°F) to 40°C (104°F).
NOTE:
Recommend not to set the water temperature more than 38°C (100°F).
Water Filter Button:
This button turns the filter pump on and off. If the heating
system is activated the filtration system will automatically start.
The water filter icon on the display is green when activated.
Water Jet Button:
Use this button to activate the jet massage
system. After 30 minutes of continues use, the jet massage
system will automatically turn off. The water jet icon on the
displays is green when activated. The angle of the water jet
nozzles inside the spa tub wall can be adjusted manually.
WARNING:
Do not run jet system when the cover is attached, air
pressure may accumulate inside the spa and cause irreparable
damage and bodily harm.
Bubble Button:
Use this button to activate the massage
system, which has a 30-minute auto-shutoff feature. The bubble
icon on the displays is green when activated.
WARNING:
Do not run Bubble system when the cover is attached, air
can accumulate inside the spa and cause irreparable damage and
bodily harm.
Sanitizer Button:
Use this button to activate and set operating hours
for the sanitation system
LED Display:
Once plugged in the LED displays the current water temperature
automatically.
NOTE:
The built-in hard water treatment function works automatically in conjunction with the
filtration system.
Jet Nozzle Adjustment
The amount of water and pressure coming out from the jet nozzles can be adjusted by
turning the jet nozzle rim clockwise (maximum water output), counterclockwise (low water
output) or anything in between. Closing one or 2 jet nozzles will divert more water pressure to
the other jet nozzles
1. Activate the sanitation system:
Press the sanitizer button on the control panel, this
