2016-0685
2017-10-02
pressure gauge
(5)
to the air valve. The pressure gauge indicator
should be in the green area for a properly inflated spa tub
(see
drawing 6)
. Repeat previous steps to add more air if necessary.
7.
Replace the air valve cap back.
NOTE:
The cap is designed to be screwed on and off. Never exert
force as this could cause the complete internal inflation system of the
valve to come loose. See “Spa Tub Air Valve Fastening” for valve
maintenance.
Inflate the Spa Cover Air Bladder
1. Open the inflation valve and insert the inflation hose (7) into the valve ,press to inflate until it is firm to
the touch but not hard
2. disconnected the inflation hose
(7)
from the air blower inflation outlet and the valve.
3. Replace the control base inflation cap (9) back, close and recess the inflation valve
NOTE:
If there is a need to add some air to the spa tub wall or spa cover
air bladder after they have been setup, refer to above “Inflate the Spa Tub
Wall” and “Inflate the Spa Cover Air Bladder” sections. The cover air
bladder is preinstalled inside the spa cover. If it needs to be reinstalled,
place the uninflated air bladder inside the spa cover lip before inflating the
bladder.
Deflation
For Spa Tub Wall:
1.
Unscrew the cap
to reveal the
stem, push the
stem in and turn
90 degree right
to secure it in the
down position
(see drawing 8).
2.
Once the
deflation is
completed,
push the stem
in and turn 90
degree left to
return it to the
inflation
position.
3.
Replace the cap back.
For Cover Air Bladder:
1.
Pull valve cap out and squeeze the valve at its base until deflated.
2.
Close and recess the valve back.
Spa Control Unit Installation
1.
Connect the spa control unit to the spa
tub
(see drawing 9)
.
Hand-tighten the connectors securely. Do not use tools to tighten
.
CAUTION:
Do not sit, lean, cover or place any objects over the spa control
unit.
2.
Attach the two filter cartridge housing assemblies to the two outlet grids
on the inside of the spa (marked “B”). Inflate the spa tub first before
installing filter pump fittings.
ATTENTION!
In order to comply with the requirements of the Virginia
