background image

2016-0685 
2017-10-02 

TABLE OF CONTENTS 

Warning

 ................................................................................................................................... 

3-4

 

Parts

 ......................................................................................................................................... 

5-6

 

Product Specifications

 ........................................................................................................... 

7

 

Set-up

 ........................................................................................................................................ 

7-10

 

Salt Level Information

 ........................................................................................................... 

11

 

Operation

 ................................................................................................................................... 

12-13

 

LED Code Chart

 ..................................................................................................................... 

14

 

Maintenance and Chemicals

 ................................................................................................... 

15-22

 

Storage

 ..................................................................................................................................... 

22

 

Troubleshooting

 ........................................................................................................................ 

23-25

 

Warranty

 ................................................................................................................................. 

26

 

 

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s 

authority to operate the equipment.

 Danger 

• 

Risk of Accidental Drowning. Extreme caution must be exercised to prevent 
unauthorized access by  children. To avoid accidents, ensure that children 
cannot use this spa unless they are supervised at all  times.

 

• 

Risk of drowning. Inspect the spa cover regularly for leaks, premature wear and tear, 
damage, or signs of deterioration. Never use a worn or damaged cover: it will not 
provide the level of protection required to  prevent unsupervised access to the spa by a 
child.

 

• 

Risk of injury. Replace damaged cord immediately. Do not bury cord. Connect to a 
grounded, grounding  type receptacle only.

 

• 

Risk of Injury. The suction fittings in this spa are sized to match the specific water 
flow created by the  pump. Should the need arise to replace the suction fittings or the 
pump, be sure that the flow rates are  compatible.

 

• 

To reduce the risk of injury, do not remove the suction fittings. Never operate a spa or hot 
tub if the suction  fittings are loose, broken, damaged, cracked or missing. Replace 
immediately. Never replace a suction  fitting with one rated less than the flow rate 
marked on the original suction fitting.

 

• 

To reduce the risk of drowning from hair and body entrapment, install a suction fitting(s) 
with a marked flow  rate that equals or exceeds the flow rate marked on the equipment 
assembly.

 

• 

Make sure the power outlet current and voltage is suitable for the electrical equipment.

 

• 

Risk of Electric Shock. Install at least 1.5 m (5 feet) from all metal surfaces. As an 
alternative, a spa may  be installed within 1.5 m (5 feet)of metal surfaces if each metal 
surface is permanently connected by a  minimum 8.4 mm2 (8 AWG) solid copper 
conductor to the wire connector on the terminal box that is  provided for this purpose.

 

• 

Risk of Electric Shock. Do not permit any electric appliance, such as a light, telephone, 
radio, or television,  within 1.5 m (5 feet) of a spa or hot tub.

 

• 

Risk of Electric Shock. Do not use the spa when it is raining, thundering or lightning.

 

WARNING 

Содержание PureSpa SJB-HS-11



























Отзывы: