3
2. Safety
instructions
This installation and operating manual of this device is to be read carefully before installation. The
specified instructions are to be followed exactly otherwise any respective warranty claim may be voided.
This also applies to any separate modifications made to the mechanical and electrical components.
The electronic housing of the current-carrying components may only be opened by a
certified electrician or approved installer.
The electrical circuit used for the system must be secured by a circuit breaker (16 A). Likewise, an ELCB
(earth leakage circuit breaker), with the maximum operating current is to be inserted, if not already
present.
The owner/operator is responsible for compliance of safety and installation provisions.
3. Guidelines, testing, environment
All electric components design and construction, as well as the circuitry, comply with the basic safety and
health standards of EC guidelines for machines. This declaration of validity lapses with any modification of
electronic components not approved by us.
The components particularly fulfil the following specifications of EU guidelines:
EC guideline machines (89/392/EEC) as amended in 91/368/EEC
EC low voltage guideline (73/23/EEC)
EC guideline electromagnetic compatibility (89/336/EEC) as amended in
93/31/EEC
The conformity of components to the above E guidelines is confirmed by CE symbol.
Applied harmonised EU standards:
EN 60335-1: 1194/A1/A11/A12/A13/A14, EN 60335-2-41: 1996
Test symbol: DC switching power supply
Kindly recycle the packaging in an environment-friendly way.
Do not dispose of the electronic components in domestic trash! According to European
Guidelines 2002/96/EC on electronic and old electronic devices and their application in
European countries, components should be collected separately and disposed through
the use of environment-friendly recycling.
