2
1. Introduction and general instructions
AQUALOOP components are designed for water treatment / sanitation of wastewater. The following types
of raw water can be treated and sanitised with AQUALOOP:
-
Clear water
-
Surface and ground water
-
Clear discharge water
-
Grey water
Five AQUALOOP components are combined and dimensioned depending on the existing input water
quality or use.
The updated application range of all AQUALOOP components, along with their application examples, and
the operational dimensioning of each AQUALOOP component related to treatment, water quality and
required tank volume for the bioreactor and clear water tank, can be found at:
http://www.intewa.de/en/products/aqualoop/technology/dimensioning/
General background knowledge for water treatment and grey water utilization can be found at:
http://wiki.intewa.net/index.php/Wasseraufbereitung_und_Grauwassernutzung/en
This manual describes the assembly, settings and start-up procedure of the membrane assembly, which is
the basis of each application.
Fig.: AQUALOOP components
