13
Operating mode display: Aeration cycle/Rest cycle
Operation display: Pump cycle T1 or T2 active
Operation display: Siphon or sludge pump mode
Operation display: Emergency mode (battery)
If no AC switching power supply is connected or following a power failure:
Instruction:
If there is a power breakout an electrical short circuit of the suction- or back flushing pump during the test
mode, the pumps and blower will stop operating. The display continues to run via the built-in 9V battery.
The parameters are thereby secured as the timer will continue to operate.
Time
Start time
- Pump cycle 1
Status display
-
Aeration ON/OFF
Bioreactor
MIN Water level
-
BRmin + (full)
-
BRmin - (empty)
Number of pump cycle
Suction A1/A2
Start time
- Pump cycle T2
Clear water tank
MAX Water level
-
CLmax
+
(full)
-
CLmax - (empty)
Current
Pump cycle A
no display in
aeration mode
14: 22:08h / A= 4 / 9
T1=05:00h / T2=16:00h
Air ON
/
BRmin + / CLmax -
16: 05:00h / A= 4 / 9
T1=05:00h / T2=16:00h
Break /
A1=2
BRmin + / CLmax -
---- Attention ----
system runs on accu
all actions disabled
9V-Accu: 9.47V
14: 22:08h / A= 4 / 9
T1=05:00h / T2=16:00h
SO = ON (no suction)
BRmin + / CLmax -
Status display
-
SO = ON
-
SLP=ON/OFF
Status display
-
Pause (Break)
-
Suction (Suction)
-
Backflushing (back
flush
