![background image](http://html1.mh-extra.com/html/intesisbox/ha-ac-knx-16/ha-ac-knx-16_user-manual_2080984020.webp)
Intesis
Box
®
KNX - Haier A.C. (VRF line)
User's manual r1.0 EN
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox is a registred trademark of
Intesis Software SLU
URL
tel
http://www.intesisbox.com
[email protected]
+34 938047134
20 / 31
4.5
Control Mode configuration
Figure 4.20
Control Mode Configuration dialog
All the parameters in this section are related with the Mode properties and communication
objects.
4.5.1
Enable use of Control Mode objects (for Control and Status)
This parameter shows/hides the
Control_ Control Mode and Status_ Control Mode
communication objects which lets you change the indoor unit control: No Central, LIFO (Last
Input First Output), Central Controller and Lock Central Controller.
20:
21:
22:
23:
45:
46:
47:
48:
o
If set to
“no”
the objects will not be shown.
o
If set to
“yes”
the
Control_
and
Status_ Control Mode
objects for No Central, LIFO (Last
Input First Output), Central Controller, Lock Central Controller will appear.
4.5.1
Initial state of Control Mode
This parameter sets the initial value for the Control Mode:
No Central, LIFO (Last Input First
Output), Central Controller, Lock Central Controller or Do not initialize
.