Intesis
Box
®
KNX - Haier A.C. (VRF line)
User's manual r1.0 EN
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox is a registred trademark of
Intesis Software SLU
URL
tel
http://www.intesisbox.com
[email protected]
+34 938047134
21 / 31
Figure 4.24
Parameter detail
o
If set to
“
Apply same initial state to all Indoor Units
”
, the parameter option selected
will apply to all indoor units.
o
If set to
“
Initial state for each Indoor Unit might differ
”
, you will be able to set this
parameter for each Indoor Unit individually.