Intesis
Box
®
KNX - Haier A.C. (VRF line)
User's manual r1.0 EN
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox is a registred trademark of
Intesis Software SLU
URL
tel
http://www.intesisbox.com
[email protected]
+34 938047134
17 / 31
4.3.5
Enable use of bit-type Fan Speed objects (for Status)
This parameter shows/hides the bit-type
Status_ Fan Speed
objects.
36:
37:
38:
o
If set to
“no”
the objects will not be shown.
o
If set to
“yes”
the
Status_ Fan Speed
objects for Speed 1, Speed 2 and Speed 3 (if
available) will appear. When a Fan Speed is enabled, a
“1”
value is returned through its bit-
type object.
4.3.6
Enable use of Text object for Fan Speed
This parameter shows/hides the
Status_ Fan Speed Text
communication object.
39:
o
If set to
“no”
the object will not be shown.
o
If set to
“yes”
the
Status_ Fan Speed Text
object will appear. Also, in the parameters, will
be shown two (or three, depending on the number of fan speeds selected) text fields, one
for each Fan Speed, that will let modify the text string displayed by the
Status_ Fan Speed
Text
when changing a fan speed.
Figure 4.15
Parameter detail
