Intesis
Box
®
KNX - Haier A.C. (VRF line)
User's manual r1.0 EN
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox is a registred trademark of
Intesis Software SLU
URL
tel
http://www.intesisbox.com
[email protected]
+34 938047134
15 / 31
When a value between
0%
and
49%
is sent to the
Control_
object the first fan speed will
be selected.
When a value between
50%
and
83%
is sent to the
Control_
object, the second speed will
be selected.
When a value between
84%
and
100%
is sent to the
Control_
object, the third speed will
be selected.
The
Status_
object will return a
33%
when the first speed is selected, a
67%
for the
second one and a
100%
for the third one.
4.3.2
Enable use of
“Fan Speed Man/Auto” objects (for Control and Status)
This parameter shows/hides the
Control_ Fan Speed Man/Auto and Status_ Fan Speed
Man/Auto
communication object which lets you set the Fan Speed into Manual or Auto mode.
12:
35:
4.3.3
Enable use of +/- object for Fan Speed
This parameter shows/hides the
Control_ Fan Speed +/-
communication object which lets you
increase/decrease the indoor unit fan speed by using two different datapoint types.
16:
o
If set to
“no”
the object will not be shown.
o
If set to
“yes”
the
Control_ Fan Speed +/-
object and a new parameter will appear.
Figure 4.14
Parameter detail
➢
Fan speed +/- operation
This parameter lets choose between the datapoints
0-Up / 1-Down [DPT_1.008]
and
0-Decrease / 1-Increase [DPT_1.007]
for the
Control_ Fan Speed +/-
object.
Fan Speed 1
Fan Speed 3
100%
Status_
0%
83%
50%
Control_
object
Control_
Status_
33%
67%
Fan Speed 2
Control_
Status_
