Intermec Trakker T2090, Руководство пользователя

Страница: 47 / 246

User Interface
2-15
2
T2090-TM
Power Management
Version X.X 123
1. Doze Time
2. Backlight Timeout
3. Auto-shutoff Time
4. Next Menu
BACK
F1 F2 F3
Doze time can be set from 0 to 15 seconds. Settings 1 through 8 are in 1/8-
second increments, while settings 9 to 15 are full, one-second increments. The
valid range time for both backlight timeout and auto-shutoff time is from 1 to
15 minutes. Item 4, Next Menu, takes you to a second power management
screen for configuring the
L
key and choosing a preferred shut-down mode.
See Chapter 7 for more information on Power Management.
Note: Timeout periods are sequential; that is, the doze countdown timer must trigger
before the countdown begins for backlight (SLEEP mode), and the backlight countdown
timer must trigger before the auto-shutoff countdown timer begins. If you set doze to
10 seconds, backlight to one minute, and auto-shutoff to two minutes, the auto-shutoff
will occur (from the ON state) after three minutes, 10 seconds.
Set Doze Time Screen
The keys and actions for the Set Doze Time, Backlight, and Auto-Shutoff Time
screens are as follows:
•
0 - 8 enters the time.
•
F1 “ABORT” key returns to the main menu without saving new values.
•
F3 “ACCEPT” or ENTER keys accepts new values and returns to the main
menu.
Set Doze Time 123
Doze Time (0 - 8): _
in 1/8 seconds
Current is: 5/8 sec.
ABORT ACCEPT
F1 F2 F3