Intermec Trakker T2090, Руководство пользователя

Страница: 144 / 246

TRAKKER T2090 Hand-Held Batch Computer User’s Manual
1
XJJ
Co d e 39
5-18
Transmit File YMODEM
Purpose: Transmits a file from the T2090 computer through the serial port and saves it on
the host computer. You must have the T2090 computer connected to the host
through the EZ Dock docking. On the host, you need to receive the file using a
serial communications package that supports the YMODEM protocol
(i.e., Windows 3.1 Terminal or Win95 Hyperterminal) or TRANSFER.EXE.
From COM Port:
%%Y1, drive:filename
where:
%%Y
is the command to transmit a file using
YMODEM
protocol.
1
indicates the T2090 computer’s serial port.
drive: indicates the drive where the file is stored on the T2090. You
must include the colon (:) after the drive letter.
filename is the file you want to transmit.
Scan: 1. Scan this bar code label:
Enter Accumulate Mode / Transmit File
*/K/O/E/EY1/L*
*+/%%Y1,*
2. Scan the bar code label(s) for the file you want to transmit. You can scan
labels from the “Full ASCII Charts” in Appendix C. The label must use this
format:
drive:filename
3. Scan this bar code label to exit Accumulate mode and transmit the file.
Exit Accumulate Mode
*-/*
*-/*
Or: You can create your own bar code labels to transmit files by creating a bar code
in this command format:
%%Y1, drive:filename
Example: To transmit the file
SHIPPING.DAT
from drive C to the host, use this command:
%%Y1,c:shipping.dat