manualshive.com logo in svg

Intermec Trakker T2090, Руководство пользователя, Страница: 135 / 246

Поделиться
Скачать
Intermec Trakker T2090 Скачать руководство пользователя страница 135

1XJJ

 

Co d e 39

 Reader Command Reference

5-9

5

Test and Service Mode

Purpose:

Runs the T2090 Setup program, allowing the user to configure the T2090. When
the user exits the Setup program, control returns to the program that was active
when the command was issued. The display is restored to the state it was in
immediately before the command was executed.

From COM Port:

..-.

Scan:

Test and Service Mode

*..-.*

*..-.*

File Management Reader Commands

The reader commands you can use to manage files and applications are listed
in this section. The file management commands are listed in alphabetical order.
You will find the purpose, syntax for commands sent from a device connected
to the serial port, and bar code labels for these reader commands:

•

Abort Program

•

Delete File

•

Receive File XMODEM

•

Receive File XMODEM-1K

•

Receive File YMODEM

•

Rename File

•

Run Program

•

Transmit File XMODEM

•

Transmit File XMODEM-1K

•

Transmit File YMODEM

Abort Program

Purpose:

Aborts or exits the current application, and the computer returns to DOS.

From COM Port:

/$

Scan:

Abort Program

*/$*

*/$*

Содержание Trakker T2090























































































































































































































































Отзывы:

Нет отзывов