Intermec Trakker T2090, Руководство пользователя

Страница: 45 / 246

User Interface
2-13
2
Starting Setup Mode
The setup mode is entered when the user presses the F1 (left key under the
display) key after pressing the
L
key or by typing FWTSETUP at the DOS
prompt. The Enter Password screen is then displayed.
Note: Examples of screens illustrated in the remainder of this chapter have rows and
columns numbered to show actual placement on the display. All of the data entry
screens have the ‘BS’ destructive backspace key available. Except for ‘BS’, keys not
specified as having any action are ignored.
Enter Password Screen
The keys and actions for the Enter Password screen are as follows:
•
0 - 9, A - Z, the dash mark (-), the space key, and the period (.) are all valid
for the password
•
F3 “ACCEPT” or ENTER keys accepts the value entered for verification.
The default factory password is “123.”
Setup Utility
Version 1.5 123
Enter Password:
_
ACCEPT
F1 F2 F3
As the password is entered, an asterisk is displayed for each character entered.
If the user fails to enter the correct password after three tries, Setup access is
denied.
If a correct password is entered, Setup access is allowed and the Setup Main
Menu is displayed.
Note: Password data is stored in the C: drive in a hidden file, IMP.DAT. If this file is
corrupted or deleted, it will be re-written with the default password (“123”) on the next
boot.