Intermec Trakker T2090, Руководство пользователя

Страница: 177 / 246

Configuration Command Reference
6-33
6
Example: You want to set a preamble that includes quotation marks. Enter the preamble
by scanning this full ASCII bar code label:
Set Preamble to “B”
*/D/KAD/B/B/BB/B/B/B*
*$+AD"""B"""*
You must enclose the data within quotation marks and precede each quotation
mark with another quotation mark so that the quotation marks are not treated
as the end of the data.
RAM Drive Size
Purpose: Configures the size and use of the RAM drive (E). You can disable the RAM
drive and use the additional 256K for programmable (Malloc) memory
allocations or configure the RAM drive to temporarily store data and files.
Important:
After you set the RAM drive, you must use the Save Configuration
to File reader command in Chapter 5 to save the current configuration to
TR2090.CFG. Then boot the computer for the change to take effect.
Note: When you boot or reset the computer, all files on the RAM drive are destroyed.
Syntax: FRdata
Acceptable values for data are:
0 Disabled, no RAM drive
16-1344 RAM drive size in kilobytes (K)
Default: Disabled
Scan:
To disable the RAM drive, scan this bar code:
Disable RAM Drive
*$+FR0*
*$+FR0*
Or: To set the RAM drive size:
1. Scan this bar code:
Enter Accumulate Mode / Set RAM Drive Size
*+/$+FR*
*+/$+FR*