Intermec Trakker T2090, Руководство пользователя

Страница: 38 / 246

TRAKKER T2090 Hand-Held Batch Computer User’s Manual
2-6
TRANSFER.EXE
Provides serial transfer of files via XMODEM or YMODEM protocols into and
out of the unit. The program runs on the T2090 and can be found in the PSK
software toolkit in the INTERMEC\IMT209\SAMPLE directory.
Syntax
c> transfer { options} {filenames}
where options are:
-Q Quiet mode. Titles, messages, and status lines are not displayed.
-M Messages are not displayed. The title and status line may appear.
-I Status line is not displayed. The title and messages may appear.
-Bnnn Baud rate, where nnn may be 110, 300, 600, 1200, 2400, 4800, 9600
(default), 19200, 38400, 57600, 11500, or 115 (short for 115200)
-R Receive the file. You must specify either this option or -S.
-S Send the file. You must specify either this option or -R.
-COMn COM port, where n is the port number. Set n to 1. (Default)
-Pprotocol Protocol, where protocol is XMODEM, XMODEMCRC (default),
XMODEM1K, XMODEMG, YMODEM, YMODEMG, YMODEMI, or
KERMIT. Keep in mind these notes about the protocols:
•
XMODEMCRC provides 1K block transmission with CRC and
fall back to Checksum mode.
•
XMODEM1K is only 1K block transmission with CRC.
•
XMODEM is 128 byte block transmission with Checksum.
•
XMODEMG and YMODEMG assume an errorless connection,
typically used with MNP connections.
•
YMODEMI is a special variant of YMODEM that allows a file
name to be specified on receive to which the first received file is
written.
where filenames are:
filenames File names depend on the protocol and the send/receive option:
•
For all XMODEM types, both send and receive require a file
name.
•
For all YMODEM types and KERMIT, the send requires at least
one file name and will accept multiple names separated by a
space.
•
For YMODEMI, a file name is optional for receiving the first file
and altering its name. If the sender continues with additional
files they will be stored per normal YMODEM standards.