Intermec Trakker T2090, Руководство пользователя

Страница: 227 / 246

Demo Software
A-15
A
On this menu, the alphanumeric keypad has also been enabled to drive the
cursor around and adjust selections. Both the alphabetic and numeric values of
a given key have the same effect. This allows the Autorepeat function of the
keypad to be used to speed up selection and adjusting of values. The keypad
does not have the ability to select an option for exit to the System Setup Menu,
however. The Abort/Save choice must be made using the function keys. This
helps to avoid accidental selections of the wrong values. The following
keyboard illustration shows the uses of the keys. Only the tinted keys are used
for this example.
A
7
B E
9
F
7 and 9 keys are not used.
C
8
D
8 key is UP. (No Function key does this. It is an
advantage of using the keypad.)
G
4
H K
6
B
4 key is Less , 6 is More.
I
5
J
This key is inactive.
M
1
N Q
3
R
1 and 3 keys are inactive.
O
2
P
2 key is Down (same as Next key).
S
-
T W
’
X
These keys are inactive.
U
0
V
These keys are inactive.
BS SP
These keys are inactive.
Y
.
Z
These keys are inactive.
Poll Setup
This allows setting the TO-HOST.BAT file to have the effect of Polling or Not
Polling when docking is detected. The screen is as follows:
The demo can be set
to be Polled for
the collected data
or Not Polled.
(P)olled or (N)ot?
[P,N]?
This must be answered with a P or N keystroke. Doing the setup for this takes
several seconds, but eventually control is returned to the System Setup Menu.
Note: This is done by doing a system() call for the batch file SWAP.BAT. Changing the
content of the batch file allows (almost) anything to be done. For example, SWAP.BAT